How to relocate a baby grand piano

Pianos routinely make movers yearly list of items that are most frequently damaged. Grand pianos are specifically problematic. Practicing the following procedures for taking apart, padding and filling grand pianos will avoid damage, lower claims expense, and improve client fulfillment.

1) A minimum of three people are required to manage a child grand piano. If the child grand piano requires to go up or down stairs or if a complete or performance grand piano requires to be carried, a minimum of 4 individuals are required.

2) Constantly finish a precise and comprehensive inventory. It might be essential or more effective to utilize a visual inventory to sufficiently describe and reveal pre-existing damage.

3) As different parts are taken apart, please place all hardware in a properly identified parts bag and after that put the parts bag in a "Parts Box".

4) Remove the music rack (lyre) from its track by pulling it toward the keyboard. Wrap it in a tidy furniture pad.

5) Disconnect the cover by removing the hinge pins. Wrap the cover in a clean furnishings pad.

6) Remove the prop that holds the cover open and cover it in a clean furniture pad. The prop has a hinge pin and remains in 2 pieces.

7) Get rid of the pedal assembly and wrap it in a clean furnishings pad. The braces at the back of the assembly rest in slots at each end. When removing the screws, please beware not to drop the braces. In addition, please be especially cautious with the push-rods so that they will not get bent. As you deal with the piano, number the push-rods from delegated right as "1", "2", and "3", by placing a piece of masking tape with the suitable number on each rod. Keep in mind: If masking tape is not available, please usage correctly labeled parts bags for this purpose. When reassembling at destination, please make sure to put the rods in the right order so that the pedals will work appropriately.

8) Pad the piano by placing a tidy rolled furnishings pad (stretch-wrap the pad to prevent it from unrolling) on the cover of the keyboard to prevent it from flopping open while you manage the piano. Note: Please ensure that the surface area of the piano is dust-free before padding it.

9) Position a piano board and connect the straps so that it is prepared to get the piano. The raised brace on the piano board need to be at the keyboard end of the piano.

10) Remove the left front leg by placing a single person beneath the piano at the left end of the keyboard. The other two people need to support the left front corner. The person below the piano must turn the maintaining block so that the long end points away from the leg. The screws, if there are any, should then be gotten rid of. The "underneath" individual should then get out from under the piano prior to in fact removing the leg. Make certain to have two people raising the corner of the piano while the 3rd person eliminates the leg. Keep in mind: Please make sure to keep in mind which legs were removed from which positions considering that some pianos have original site legs that are not interchangeable.

11) Place the piano on the piano board by lowering the "leg-less" end onto the board. Please be sure to raise the entire piano slightly while finishing this maneuver to prevent excessive pressure on the remaining, attached legs as the piano tips. Be sure that the piano is focused snugly versus the brace at the end of the piano board.

12) Remove the 2 remaining legs and wrap them in tidy furniture pads. These legs are kept in place by a "crucial and slot" arrangement. To eliminate the leg, slide it inward toward the center of the piano up until it comes out of the slot.

13) Protect the piano to the piano board by bringing the ends of the straps together and fastening them. Place folded burlap pads over the furnishings pads but under the straps to provide additional defense to the edges of the piano. To prevent the strap near the narrow end of the piano from slipping off, connect the loose ends of the two straps together.

14) To move the piano over a flat, level surface area, tilt the piano and piano board and place a four-wheel dolly under the center of the piano board.

15) To move the piano up or down stairs, use the piano board as a skid. After sufficiently padding the stairs for defense against home damage, put the keyboard end of the piano toward the bottom of the stairs. Attach a bulge strap to the leading end of the piano board to avoid the piano from slipping.

16) To pack the piano, leave it on the piano board and location it in a tier as the very first base item with the keyboard dealing with the wall of the preceding tier. The very best location to fill the cushioned lid is between the piano and the preceding tier or in between the wall and the piano.

Although grand pianos represent a considerable obstacle, they can be moved without anchor damage by utilizing typical sense and practicing the treatments noted above.

Leave a Reply

Your email address will not be published. Required fields are marked *